FEATHERCRETE is an ultra fine textured, latex modified cement based patch.  FEATHERCRETE may be used to skim or fill most substrates without priming or the use of additives.  FEATHERCRETE is creamy and smooth spreading to provide a superior finish for the installation of most any floor covering, including sheet vinyl.

 FEATURES AND BENEFITS

· Covers virtually any surface—including ceramic
       tile
· Thinnest applications—finest finish.
· Best coverage per pound—
      10 lb. bag covers up to 33 sq. ft. @ 1/8” thickness
· 20 minute pot life
· Easy mixing 2 to 1 ratio—just add water
· Fast drying—install finished flooring in as little as
      15 minutes
· Compatible with most adhesives and flooring
       systems.

THE DEPENDABLE DIFFERENCE

· Higher strength

· More economical

· Superior bond.

Where to use….

Use FEATHERCRETE to smooth cracks, joints or other imperfections in concrete, wood, vinyl, adhesive residue, ceramic tile and metal.

(For further usage and limitation information see reverse side.)

PHYSICAL CHARACTERISTICS

Working time:  18-22 minutes
Initial set time: 19 minutes
Final set time:  40 minutes
Compressive Strength: 3,200 psi.
Flexural Strength: 1,100 psi.
Coverage:        10 lb. bag covers
  Over concrete: 100-150 square feet (skim)
  Over plywood: 200-250 square feet (skim)
  Up to 33 sq. ft. at 1/8” thickness (skim)

Thickness:  particle thin to 1/2” per layer.

Mix Ratio:  2:1 powder to water or 2.5 quarts water to one 10 lb. bag.

Application conditions:  50ºF minimum

Color:   dark gray

Admixture:    Cool clean water
(or Acrylic Embossing Additive)

VOC Content: zero

Recycled Content: 21%

 
PACKAGING

10 lb. bag