|
PREPARATION AND APPLICATION
|
|
All concrete areas to be treated should be thoroughly cleaned, ensuring the removal of any dirt, dust, grease, oil, or any other contaminant. All areas should be structurally sound; any weak areas must be removed. (Resurfacing may be accomplished with DEPENDABLE Wearflow or Skimflow.)
Use DEPENDABLE ACRYLIC SEALER straight from the container. Do not dilute. The material may be applied by brush, roller, or spray. Either hand pump or industrial airless sprayer may be used. Apply in an even, continuous coat; avoid any puddling.
When applying by roller, do not pour directly on the surface. Instead, dip into bucket or pour into a rolling pan. Using a short nap roller, apply in even strokes across the floor, limiting the amount of overlap.
DEPENDABLE ACRYLIC SEALER is opaque white in appearance and dries clear.
|
|
CLEAN UP
|
|
Tools and equipment may be cleaned with soap and warm water if done soon after use.
|
|
LIMITATIONS
|
|
• Keep from freezing.
• Do not apply when temperatures are below 45°F.
• Although compatible with many flooring adhesives, test section is advisable for questionable adhesives.
• Do not use in areas where it may be subject to hot oil.
• High relative humidity will extend drying times.
|
|
24 HOUR EMERGENCY: CHEMTREC® 1-800-424-9300
NON-TOXIC and NON-FLAMMABLE
Keep container closed and keep away from children. May cause slight eye abrasion or irritation if spilled or rubbed in eyes. Flush thoroughly with water. If taken internally, call a physician.
Technical Assistance: call 1-800-227-3434 |
|
|
