- CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Acrylic Embossing Additive
PRODUCT USE: Latex admixture for use over embossed vinyl floors.
MANUFACTURED BY: Dependable Chemical Co., Inc.
PO Box 16334
Rocky River, OH 44116
440-333-1123 or 800-227-3434
MSDS DATE 4/15/97 Rev. 10/7/2003
24 HOUR EMERGENCY:
CHEMTREC: 800-424-9300
- COMPOSITION / INFORMATION ON INGREDIENTS
| COMPONENT |
CAS NUMBER |
AMOUNT (% w/w) |
NOTE |
| Acrylic Copolymer Latex |
25767-47-9 |
24 - 27 |
1 |
| Water |
7732-18-5 |
73 - 78 |
1 |
| Carbonyldomide |
57-13-6 |
1-3 |
1 |
| Other ingredients (proprietary) |
mixture |
1-3 |
2 |
NFPA RATING: HEALTH 1 FIRE 0 REACTIVITY 0
Note 1: This document is prepared pursuant to OSHA Hazard Communication Standard (29 CFR 1910.1200). In addition, substances not "hazardous" per this OSHA standard may be listed.
Note 2: The proprietary ingredients include small amounts of chemical additives and biocides to enhance and preserve the product. The identity of proprietary ingredients may be made available as provided in the Standard. No amount of an individual proprietary substance exceeds 1%.
- PHYSICAL DATA
DESCRIPTION: Polymer dispersion
PHYSICAL STATE: Liquid
APPEARANCE: Milky white
ODOR: Slight ester odor
pH: Slightly alkaline
SOLUBILITY IN WATER: Miscible
SPECIFIC GRAVITY: 1.0
VAPOR PRESSURE: 17.5 mm Hg @ 20° C
- FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: Not available
AUTOIGNITION: Not available
FIRE FIGHTING EQUIPMENT: Use water fog, foam, CO2 or dry chemical extinguishers. Fire fighters should use positive pressure, self contained breathing apparatus.
- REACTIVITY DATA
CHEMICAL STABILITY: Stable
HAZARDOUS POLYMERIZATION: Does not occur
INCOMPATIBILITY: Metal salts will coagulate the product. Product is not an oxidizer or corrosive.
HAZARDOUS DECOMPOSITION PRODUCTS: Carbon monoxide, carbon dioxide, nitrogen oxides, and hydrocarbons such as styrene and butyl acrylate.
- HEALTH HAZARD DATA
PRIMARY ROUTES OF EXPOSURE: Inhalation, ingestion, skin contact, and eye contact.
INHALATION: Acute, excessive exposure to the product as a mist or vapor may result in respiratory tract irritation, headache and drowsiness
INGESTION: The product may irritate the throat when swallowed and cause gastric upset, pain, and diarrhea.
SKIN AND EYE CONTACT: Some components of the product may be irritating to the skin and eyes.
CARCINOGENICITY: Components of the product are not on the carcinogen lists of IAEC (Int'l Agency for Research on Cancer) and NTP (National Toxicology Program). OSHA does not regulate any ingredients as carcinogens.
- FIRST AID
SKIN: Wash affected areas with mild soap and water. If irritation persists or excessive redness occurs, apply sterile dressings and get medical attention.
EYES: Flush eyes with water for at least 15 minutes. If irritation persists, transport victim to medical attention.
INHALATION: For gross inhalation of mist or vapor, remove to fresh air. If breathing difficulty persists, aid the breathing and get immediate medical attention.
INGESTION: If swallowed, give 2 glasses of water to drink and dilute the product. IMMEDIATELY see a physician. Never give anything by mouth to an unconscious person.
AGGRAVATED MEDICAL CONDITIONS: No data available for this product.
- HANDLING PRECAUTIONS AND CONTROLS (Keep out of reach of children)
MIST AND VAPOR CONTROL: Avoid excessive mist and vapor generation such as spraying the product or using it at an elevated temperature. Always work with the product in areas that have sufficient room ventilation. Avoid using the product in confined or enclosed spaces unless mechanical ventilation is provided from a fresh air source at an air flow rate sufficient to dilute the vapor or mist to acceptable concentrations and maintain the ambient oxygen concentration. Also provide good air mixing in the space to disperse the vapor or mist.
RESPIRATORY PROTECTION: When excessive mist or vapor generation occurs in a work area, wear respirators approved for organic vapor/mist protection at the relevant exposure concentration. If respirators are used, the employer must have a respirator program in place that satisfies the OSHA requirements for a minimally acceptable program (e.g., 29 CFR 1910.134).
SKIN AND EYE CONTACT: Avoid direct contact with large amounts of product. Use gloves, goggles, apron and boots when excessive contact cannot be avoided. Wash hands and forearms with water and mild soap after use.
- ENVIRONMENTAL AND DISPOSAL INFORMATION
DISPOSAL CONSIDERATIONS: Avoid disposing the product into drains, sewers or waterways without proper authority.
DISPOSAL METHOD: The preferred method is disposal in a landfill. The disposal method should comply with applicable federal, state and local laws and regulations regarding management, use, handling, treatment, storage, disposal, and transportation of used chemicals.
- REGULATORY INFORMATION
NOTICE: Regulatory requirements are subject to change and may differ from one location to another. It is the buyer's responsibility to ensure that its activities comply with federal, state, or local laws. The following specific information is not meant to be a comprehensive list of applicable regulations.
WORKPLACE CLASSIFICATION: The product is considered hazardous under the OSHA Hazard Communication Standards 29 CFR 1910.1200.
SARA TITLE 3: This product does not contain chemicals listed in the Superfund Amendments and Reauthorization Act, Section 313 at or above de minimis concentrations.
TSCA: All components are included in the EPA Toxic Substances Control Act Chemical Substance Inventory.
RCRA: The product is not considered hazardous waste by the EPA Resource Conservation and Recovery Act 40 CFR 261. Please be advised that chemical additions to, processing of, or otherwise altering this material may make this waste information inaccurate or inappropriate. State and local waste disposal requirements may be more restrictive or different from the federal regulations.
