See product instructions for complete information.
(ML)	Metal lathe is secured to the primed subfloor
(1)	Surface must usually be primed with DEPENDABLE ACRYLIC EMBOSSING ADDITIVE and use this additive in place of water in the mix.
(2)	Must be mixed with DEPENDABLE ACRYLIC EMBOSSING ADDITIVE; SKIMCOAT can be used as an embossing leveler over non-cushioned sheet vinyl.
(3)	Coverage rate, in square feet for each 1/8" thickness per each 100 lb. of material.
(4)	Allowed to flow and level itself, the material will develop a 1/8" thickness. However, when the material begins to gel, it may be worked or finished to a featheredge.
(5)	A finished working/wear surface. Serves as industrial/heavy-duty wear layer with or without sealer as appropriate.
(6)	A light duty (foot traffic) commercial wear layer.
(7)	Cover time varies depending upon temperature, humidity and material thickness. Contact technical assistance.